0×00000027:RDR_FILE_SYSTEM

Error Analysis: when this blue screen code occurs, it indicates a redirector file system error. The Windows memory management has problem will also lead to the emergence of this blue screen code.

Solution: if it is the problem of the Windows memory management, increasing the memory storage will solve the problem.

0x0000002E:DATA_BUS_ERROR

Error Analysis: this blue screen code indicates a defective RAM (including motherboard, Level 2 cache, or video memory), and it caused by that the device driver try to access non-existent memory address. In addition, hard drive is damaged by the viruses or other problem, this blue screen code is possible occurred.

Solution:1) Check whether your laptop has viruses or not.
2) Use \ \ “chkdsk / r \ \” command to check all the disks.
3) Use memory testing software to check your RAM.
4) Check if the hardware is installed correctly, for example, if the hardware is installed firmly or the finger is clean or not.

0×00000050:PAGE_FAULT_IN_NONPAGED+AREA

Error Analysis: this blue screen code indicates there are problems of memory (including motherboard, Level 2 cache, or video memory), incompatible software (mainly including the remote control and antivirus software),

Solution: If the blue screen message lists a driver by name, try to enter safe mode or Recovery Console mode to disable or remove the drivers listed on the blue screen.
If it doesn’t list the message, you should remove all what you have installed recently.
If the error is still by having done this, what you should do is to contact your hardware manufacturer.

0×00000051:REGISTRY_ERROR

Error Analysis: this blue screen code indicates that there is something wrong with the Registry or configuration manager. It may be caused by the defective hardware or file system. If refresh operations are failed because of the limit resource, this blue screen code will appear too.

Solution: Use \ \ “chkdsk / r \ \” command to check all the disks, and repair the errors.

0×00000058:FTDISK_INTERNAL_ERROR

Error Analysis: this blue screen code indicates that a fault-tolerant disk driver internal error has occurred. It can not be matched between pages in the primary and secondary data caches.

Solution: first of all, you can try to reboot your laptop to see if this resolves the problem.
If not, you had better select the Last Known Good option to reboot your laptop to see if this error code disappeared.
If you can not find the Last Known Good configuration, choose the Emergency Repair Disk to reboot your laptop to see if it works.