Today we talk about other kinds of blue screen codes’ reasons and solutions.

0x0000006F:SESSION3_INITIALIZATION-FAILED

Error Analysis: this blue screen code indicates that the session manager process creation failed. This error usually happens when you boot your laptop, usually caused by the error device driver or system files.

Solution: if you installed hardware recently, you can disable and remove the hardware, and then you can see if the problem is still.
If removing the hardware doesn’t work or you don’t do any installation, you can reboot your laptop with recovery options set to create a dump file. Followed by it, you can reboot your laptop with the selection of Last Known Good option.
If the blue screen code continues to appear, I recommend you use the Windows installation CD to repair the system.

0×00000077:KERNEL_STACK_INPAGE_ERROR

Error Analysis: this blue screen code indicates that requested page of kernel data could not be read in. This error code indicates disk hardware failure, disk data corruption, or possible virus infection.

Solution: STOP: 0×00000077 (parameter, parameter, parameter, parameter), if the first and third parameter are zero, it indicates that there is a problem of your laptop hardware. If you installed hardware recently, you also need to disable or remove the hardware.
In case of the virus infection, you can scan the system with the antivirus software.
At last, you can check and repair the disk errors by running the Chkdsk follow the instructions.

0x0000007A:KERNEL_DATA_INPAGE_ERROR

Error Analysis: this blue screen code is often caused by that the kernel data in the virtual memory can not be read into memory. The reason may be that the virtual memory paging file has the problem of bad cluster, viruses, and disk controller error or memory issue.

Solution: first of all, upgrade your anti-virus software to the latest version to see if there is virus in your laptop.
If there is 0xC000009C (indicates bad blocks (sectors) on the hard disk) or 0xC000016A code (bad blocks (sectors) on the hard disk) in the blue screen code information, it is resulted from the bad clusters, and if the system disk inspection tool can not repair it automatically. In this time, you should enter the Recovery Console and running the Chkdsk command.
And when you see this blue screen code, you also can see the blue screen code of “0×00000077:KERNEL_STACK_INPAGE_ERROR”.

0x0000007B:INACESSIBLE_BOOT_DEVICE

Error Analysis: this blue screen code indicates that when Windows can not access the system partition or boot volume in the boot process. This problem usually occurs in the first boot time when you have replaced the motherboard; it is mainly because that the disk or SCSI controller with the new motherboard is different from that of the old motherboard so that the laptop can not support it. Also, this error might occur because of the installation of a new SCSI adapter or disk controller or if the disk was repartitioned with the system partition.
This blue screen code might occur because of the virus infection or damaged hard disk.

Solution: generally, you can solve this problem as long as you boot your computer with the installation CD-ROM and do a repair installation.
If that is because of the damaged hard disk itself, please install it to another computer, and runs the \\chkdsk / r \ \ command to fix the errors followed by the instruction.
For more information about hard disk corruption, you can see the “Stop 0×00000024 or NTFS_FILE_SYSTEM” in the article “Blue Screen of Death STOP Codes (two)”.
If this blue screen code is caused by the virus, you can scan the system with the antivirus software.

0x0000007F:UNEXPECTED_KERNEL_MOED_TRAP

Error Analysis: this blue screen code indicates that a trap occurred in kernel mode, the kernel is not permitted to have or intercept.
This blue screen code may also caused by the defective hardware such as memory hardware or some kind of software.
Sometimes, overclocking will also result in this error.

Solution: try to use the detection software such as Memtest86 to make sure that if the memory is overclocking, if it is the problem of the overclocking systems, restore all clock and bus speed settings to the manufacturer recommended.
In addition, if there is a problem of the overclocking systems, the South Bridge chip of the motherboard will overheat, so lower the temperature of the South Bridge will makes the laptop works well.
This blue screen code can occur by the installation of incompatible applications, drivers, or system services, you can disable or remove it, and moreover, you can also get an advice from the manufacturer.

The related articles:

Blue Screen of Death STOP Codes (one): “Stop 0×0000000A” error

Blue Screen Codes Reasons and Solutions (two)

Blue Screen Codes Reasons and Solutions (three)