Today we talk about other kinds of blue screen codes’ reasons and solutions.

0x0000006F:SESSION3_INITIALIZATION-FAILED

Error Analysis: this blue screen code indicates that the session manager process creation failed. This error usually happens when you boot your laptop, usually caused by the error device driver or system files.

Solution: if you installed hardware recently, you can disable and remove the hardware, and then you can see if the problem is still.
If removing the hardware doesn’t work or you don’t do any installation, you can reboot your laptop with recovery options set to create a dump file. Followed by it, you can reboot your laptop with the selection of Last Known Good option.
If the blue screen code continues to appear, I recommend you use the Windows installation CD to repair the system.

0×00000077:KERNEL_STACK_INPAGE_ERROR

Error Analysis: this blue screen code indicates that requested page of kernel data could not be read in. This error code indicates disk hardware failure, disk data corruption, or possible virus infection.

Solution: STOP: 0×00000077 (parameter, parameter, parameter, parameter), if the first and third parameter are zero, it indicates that there is a problem of your laptop hardware. If you installed hardware recently, you also need to disable or remove the hardware.
In case of the virus infection, you can scan the system with the antivirus software.
At last, you can check and repair the disk errors by running the Chkdsk follow the instructions.

0x0000007A:KERNEL_DATA_INPAGE_ERROR

Error Analysis: this blue screen code is often caused by that the kernel data in the virtual memory can not be read into memory. The reason may be that the virtual memory paging file has the problem of bad cluster, viruses, and disk controller error or memory issue.

Solution: first of all, upgrade your anti-virus software to the latest version to see if there is virus in your laptop.
If there is 0xC000009C (indicates bad blocks (sectors) on the hard disk) or 0xC000016A code (bad blocks (sectors) on the hard disk) in the blue screen code information, it is resulted from the bad clusters, and if the system disk inspection tool can not repair it automatically. In this time, you should enter the Recovery Console and running the Chkdsk command.
And when you see this blue screen code, you also can see the blue screen code of “0×00000077:KERNEL_STACK_INPAGE_ERROR”.

0x0000007B:INACESSIBLE_BOOT_DEVICE

Error Analysis: this blue screen code indicates that when Windows can not access the system partition or boot volume in the boot process. This problem usually occurs in the first boot time when you have replaced the motherboard; it is mainly because that the disk or SCSI controller with the new motherboard is different from that of the old motherboard so that the laptop can not support it. Also, this error might occur because of the installation of a new SCSI adapter or disk controller or if the disk was repartitioned with the system partition.
This blue screen code might occur because of the virus infection or damaged hard disk.

Solution: generally, you can solve this problem as long as you boot your computer with the installation CD-ROM and do a repair installation.
If that is because of the damaged hard disk itself, please install it to another computer, and runs the \\chkdsk / r \ \ command to fix the errors followed by the instruction.
For more information about hard disk corruption, you can see the “Stop 0×00000024 or NTFS_FILE_SYSTEM” in the article “Blue Screen of Death STOP Codes (two)”.
If this blue screen code is caused by the virus, you can scan the system with the antivirus software.

0x0000007F:UNEXPECTED_KERNEL_MOED_TRAP

Error Analysis: this blue screen code indicates that a trap occurred in kernel mode, the kernel is not permitted to have or intercept.
This blue screen code may also caused by the defective hardware such as memory hardware or some kind of software.
Sometimes, overclocking will also result in this error.

Solution: try to use the detection software such as Memtest86 to make sure that if the memory is overclocking, if it is the problem of the overclocking systems, restore all clock and bus speed settings to the manufacturer recommended.
In addition, if there is a problem of the overclocking systems, the South Bridge chip of the motherboard will overheat, so lower the temperature of the South Bridge will makes the laptop works well.
This blue screen code can occur by the installation of incompatible applications, drivers, or system services, you can disable or remove it, and moreover, you can also get an advice from the manufacturer.

The related articles:

Blue Screen of Death STOP Codes (one): “Stop 0×0000000A” error

Blue Screen Codes Reasons and Solutions (two)

Blue Screen Codes Reasons and Solutions (three)

0×00000027:RDR_FILE_SYSTEM

Error Analysis: when this blue screen code occurs, it indicates a redirector file system error. The Windows memory management has problem will also lead to the emergence of this blue screen code.

Solution: if it is the problem of the Windows memory management, increasing the memory storage will solve the problem.

0x0000002E:DATA_BUS_ERROR

Error Analysis: this blue screen code indicates a defective RAM (including motherboard, Level 2 cache, or video memory), and it caused by that the device driver try to access non-existent memory address. In addition, hard drive is damaged by the viruses or other problem, this blue screen code is possible occurred.

Solution:1) Check whether your laptop has viruses or not.
2) Use \ \ “chkdsk / r \ \” command to check all the disks.
3) Use memory testing software to check your RAM.
4) Check if the hardware is installed correctly, for example, if the hardware is installed firmly or the finger is clean or not.

0×00000050:PAGE_FAULT_IN_NONPAGED+AREA

Error Analysis: this blue screen code indicates there are problems of memory (including motherboard, Level 2 cache, or video memory), incompatible software (mainly including the remote control and antivirus software),

Solution: If the blue screen message lists a driver by name, try to enter safe mode or Recovery Console mode to disable or remove the drivers listed on the blue screen.
If it doesn’t list the message, you should remove all what you have installed recently.
If the error is still by having done this, what you should do is to contact your hardware manufacturer.

0×00000051:REGISTRY_ERROR

Error Analysis: this blue screen code indicates that there is something wrong with the Registry or configuration manager. It may be caused by the defective hardware or file system. If refresh operations are failed because of the limit resource, this blue screen code will appear too.

Solution: Use \ \ “chkdsk / r \ \” command to check all the disks, and repair the errors.

0×00000058:FTDISK_INTERNAL_ERROR

Error Analysis: this blue screen code indicates that a fault-tolerant disk driver internal error has occurred. It can not be matched between pages in the primary and secondary data caches.

Solution: first of all, you can try to reboot your laptop to see if this resolves the problem.
If not, you had better select the Last Known Good option to reboot your laptop to see if this error code disappeared.
If you can not find the Last Known Good configuration, choose the Emergency Repair Disk to reboot your laptop to see if it works.

More information about the  Blue Screen of Death STOP Codes is written now.

0×00000012:TRAP_CAUSE_UNKNOWN

Error Analysis: If you encounter this error message, it indicates a trap from an unknown cause.

Solution: The Microsoft can not analyze the reason. What you can do is to think about when this error occurs and what you were doing with your laptop. Identify the possible causes for it, then take some related measures.

0x0000001A:MEMORY_MANAGEMENT

Error Analysis: This is a Windows 2000 Executive character-mode STOP message. It indicates a general memory management problem. For example, the newly installed hardware or memory itself has problems.

Solution: If this error message appeared on the screen during the installation of Windows, it may because that amount of RAM and disk space required to load the operating system is too small.
If this is the first time you have booted after installing new hardware, remove the hardware and boot again.
If you don’t do some installation, you can reboot your laptop with the recovery options set to create a dump file or select the Last Known Good option.

0x0000001E:KMODE_EXCEPTION_NOT_HANDLED

Error Analysis: It indicates that the Windows XP kernel detected an illegal or unknown processor instruction. The problem may be similar to that of the 0x0000000A.

Solution: It may be the system firmware you want to install is not compatible to your laptop,
If the blue screen message lists a driver by name, try to enter safe mode or Recovery Console mode to disable or remove the drivers listed on the blue screen.
If the stop message lists the file Win32k.sys, it may be caused by the by third-party remote control software. You should to disable it in the safe mode or Recovery Console mode.
If it occurs when you are trying to turn off some kind of software, you just need to upgrade or remove it.

0×00000023:FAT_FILE_SYSTEM
0×00000024:NTFS_FILE_SYSTEM

Error Analysis: 0×00000023:FAT_FILE_SYSTEM which indicates a FAT file system problem. And 0×00000024:NTFS_FILE_SYSTEM indicates an NTFS file system problem. These two blue screen errors are likely caused by the disk itself which are damaged physically. They may be also because there is too much disk fragmentation and may be caused by virus scanners, backup programs too.

Solution: First, run \\”Chkdsk /r\\” in the command prompt to check and repair the disk errors, if there is a Bad Track on the report, try to use the hard drive vendor inspection tool to inspect and repair.
Second, disable all the software such as virus scanners, firewall and backup programs.
Third, right click C:\\winnt\\system32\\drivers\\fastfat.sys and choose the Properties option to see if the version matches the current system used by the Windows version.
Forth, install the latest Motherboard drivers and upgrade other drivers.